If your brake pedal is hard to push My Auto Shop can get it sorted with a Brake Inspection. Simply leave as many details about the issue as you can and we will contact local MTA approved mechanics in Masterton that are qualified to fix the underlying issue. We'll email you quotes for an inspection within 2 working days, and where possible provide an indication as to the likely underlying issue(s) and cost to fix. You can book directly on the My Auto Shop platform in minutes.

How a Brake Inspection works with My Auto Shop:

A qualified mechanic will check over your entire braking system to understand whats causing the issue. This includes checking of the brake fluid for contamination, brake lines, and removing the wheels to measure the thickness of the brake pads, rotors or shoes (if applicable).

The following components are looked at during a Brake Inspection:
- Brake pads and shoes
- Hydraulic fluid
- Rotor and drum wear
- Calipers
- Wheel cylinders
- All brake hardware
- All hoses and lines
- Master cylinder
- Anti-lock system

They will then quote up any repairs or replacement parts if required.

When your brake pedal is hard to push its often as a result of a:

• Bad brake booster;
• Vacuum hose is leaking;
• Check valve malfunction; or
• Wrong-size parts.

Popular services linked to a Brake Inspection:

Brake Wheel Cylinder Replacement

A brake wheel cylinder is part of the braking system for vehicles with drum brakes. They are often replaced with the car's brake shoes and always in pairs i.e. both sides. The brake wheel cylinder is activated by hydraulic brake fluid which forces the brake shoes against the drum when the brakes are applied.

It is important that the brakes are adjusted and that the brake fluid system is bled to remove any air to ensure that the brake performance is maintained following a brake wheel cylinder replacement.

Brake Master Cylinder Replacement

Your brake master cylinder is what makes your car stop when you press the brake pedal. When you press the brake pedal, this puts pressure through the master cylinder which then distributes this pressure to the brakes on the 4 different corners of the car. It’s completely essential to your brakes working as they should so it should be in perfect working condition at all times.

Brake Light Switch Replacement

It’s pretty common for a brake light bulb to blow out every now and again. If all the brake lights stop working, i.e nothing lights up when you press the brake pedal, then it’s most likely a problem with the wiring, relay or switches. If all your brake lights don’t come on then the switch may be faulty.

Rear Brake Pad and Rotor Replacement

Most modern cars are fitted with rear brake discs unlike older models which typically used a drum set up. Disc brakes perform better than the older drum counterparts in terms of braking ability, however they don’t last as long as drums. Despite the braking bias being directed primarily towards the front of the car, the rear brakes do wear out. They also house the handbrake, parking brake or emergency brake. Which makes them a vital component.