If your vehicle is overheating My Auto Shop can get it sorted with a Engine Inspection. Simply leave as many details about the issue as you can and we will contact local MTA approved mechanics in Porirua that are qualified to fix the underlying issue. We'll email you quotes for an inspection within 2 working days, and where possible provide an indication as to the likely underlying issue(s) and cost to fix. You can book directly on the My Auto Shop platform in minutes.

How a Engine Inspection works with My Auto Shop:

Our qualified mechanic will look to complete a thorough inspection of your vehicle's engine using the information or symptoms you have provided via the My Auto Shop platform. To complete this the mechanic will usually start by plugging into your OBDII port and completing a complete diagnostic scan. This will highlight any error or warning codes your vehicle has and will provide the mechanic with information they. need to fix your problem.

Depending on the symptoms the mechanic will take a good look at your vehicles:
- Drive & timing belts (cambelt, serpentine belts);
- Camshaft & crankshaft;
- Spark plugs; or
- Oil pan.

Before completing any repairs the mechanic will complete a quote and look for your approval.

When your vehicle is overheating its often as a result of a:

• Low coolant level
• Bad cooling fan
• Faulty thermostat
• Plugged coolant passageways

Popular services linked to a Engine Inspection:

Radiator Bottom Hose Replacement

In order to send your cooled coolant from the radiator to the engine, it has to travel through the radiator bottom hose. This hose is prone to wearing out over time, this is due to the constant pressure and heat cycles. You don’t want coolant going on the ground instead of the engine, so get the bottom hose fixed as soon as possible.

Exhaust Manifold Gasket Replacement

You don't want your engine's exhaust pouring into your car. The exhaust manifold connects to your exhaust pipe, carrying gases towards the muffler until they exit via the tailpipe. It is the main gasket that seals and pressurises the entire exhaust system. Gaskets are used to seal gaps between two different surfaces. The surface where the exhaust manifold meets the engines parts must be sealed - this is what the Exhaust Manifold Gasket does.

Idler Pulley Replacement

The idler pulley is a component that doesn’t power anything but it makes sure that things can be powered correctly. Your drive belts power things like power steering, alternators, water pumps etc. The idler pulley makes sure that all of these can be powered as they should and that all the required belts stay where they should.

Fuel Pressure Regulator Replacement

To pump fuel from your gas tank to your engine, your car has a fuel pump. In order to make sure that your fuel pump sends the right pressure fuel to the engine, your car has a fuel pressure regulator. When it plays up, your car can get too much or too little fuel and this can cause issues with your driving.