If your vehicle vibrates going uphill My Auto Shop can get it sorted with a Engine Inspection. Simply leave as many details about the issue as you can and we will contact local MTA approved mechanics in Porirua that are qualified to fix the underlying issue. We'll email you quotes for an inspection within 2 working days, and where possible provide an indication as to the likely underlying issue(s) and cost to fix. You can book directly on the My Auto Shop platform in minutes.

How a Engine Inspection works with My Auto Shop:

Our qualified mechanic will look to complete a thorough inspection of your vehicle's engine using the information or symptoms you have provided via the My Auto Shop platform. To complete this the mechanic will usually start by plugging into your OBDII port and completing a complete diagnostic scan. This will highlight any error or warning codes your vehicle has and will provide the mechanic with information they. need to fix your problem.

Depending on the symptoms the mechanic will take a good look at your vehicles:
- Drive & timing belts (cambelt, serpentine belts);
- Camshaft & crankshaft;
- Spark plugs; or
- Oil pan.

Before completing any repairs the mechanic will complete a quote and look for your approval.

When your vehicle vibrates going uphill its often as a result of a:

• Damaged CV Axle
• Damaged CV Joints
• Failing U-Joint
• Low or Dirty Differential Fluid

Popular services linked to a Engine Inspection:

Oil Cooler Line Replacement

Your oil cooler lines carry oil from the engine to the cooler and from the cooler to the sump. You don’t want these to leak or split, that can lead to oil spilling across the road. Oil outside the car is never a good thing so if one starts leaking, get it replaced as soon as possible.

Timing Chain Replacement

Most vehicles on our roads use a cambelt to ensure the engine valves operate with the correct timing. These belts wear out over time, needing to be replaced at specific intervals. To avoid this, some vehicles use a timing chain, which achieves the same objective without the maintenance hassle. Timing chains are made of hardened metal to reduce the impact of wear and tear. Timing chains are not part of a vehicle’s scheduled maintenance and only need replacing when damaged.

Throttle Body Replacement

When running, your engine needs a certain amount of fuel and air to perform at its best. The fuel injectors take care of the fuel part, the throttle body takes care of the air part. The throttle body is connected to your accelerator by a wire or by a cable, it regulates how much air is let into the engine and therefore how quickly the car accelerates.

Cambelt Replacement

Also known as a “timing belt” the cambelt ensures the engine values open and close at the correct time by ensuring the camshaft and crankshaft in the engine remain aligned. The belt, made from reinforced rubber, is tensioned between a series of pulleys and tensioners, making sure that the belt does not slip and that it remains aligned, for optimum engine performance. Some vehicles have a timing chain that replaces the cambelt. Timing chains are more reliable and therefore need replacing less often, but are more complicated to replace if they become damaged.