If your brakes are not operating safely My Auto Shop can get it sorted with a Brake Inspection. Simply leave as many details about the issue as you can and we will contact local MTA approved mechanics in Hastings that are qualified to fix the underlying issue. We'll email you quotes for an inspection within 2 working days, and where possible provide an indication as to the likely underlying issue(s) and cost to fix. You can book directly on the My Auto Shop platform in minutes.

How a Brake Inspection works with My Auto Shop:

A qualified mechanic will check over your entire braking system to understand whats causing the issue. This includes checking of the brake fluid for contamination, brake lines, and removing the wheels to measure the thickness of the brake pads, rotors or shoes (if applicable).

The following components are looked at during a Brake Inspection:
- Brake pads and shoes
- Hydraulic fluid
- Rotor and drum wear
- Calipers
- Wheel cylinders
- All brake hardware
- All hoses and lines
- Master cylinder
- Anti-lock system

They will then quote up any repairs or replacement parts if required.

When your brakes are not operating safely its often as a result of a:

• Loss of Hydraulic Pressure
• Emergency Brake Engaged
• Worn or Uneven Brake Pads
• Stuck Caliper or Slide Pin
• Collapsed Brake Hose
• Brake Line Issues
• Worn Parts
• Malfunctioning Brake Booster
• Dirty Brake Fluid
• Warped Rotors
• Sticking Shoe Adjusters
• Worn Brake Shoes
• Broken Retracting Springs

Popular services linked to a Brake Inspection:

Handbrake Cable Replacement

You may be able to hill start without one, but the good old handbrake plays an important role in keeping your parked car in one place. Nowadays the handbrake cable takes on a couple of different guises. More and more modern cars have button handbrakes, while some vehicles use foot brakes. The cable behind the scenes is there regardless, either connected directly to the lever or to an electric motor (for button operated models). When engaged the cable activates the rear brakes of your car, either by directly engaging the brake shoes or for vehicles with rear disc brakes it is attached to a brake caliper.

It is possible to over-tighten a brake cable, leading to brake rubbing and shortening the life of the vehicle’s brakes.

Front Brake Pad Replacement

Your front brake pads are the things that are pressed against the front brake rotors when you press the brake pedal. The friction between the pad and rotor is what creates the stopping ability. These need to be in top working condition. Not just to keep you safe and prevent accidents, they also need to be in good working order to pass a warranty of fitness.

Rear Brake Rotor Replacement

A rear brake rotor is that disc behind your wheel. Called a ‘rotor’ because it rotates with the wheels as it is connected directly to the hub assembly. It is usually made out of a steel composite material that is designed to withstand large loads and temperatures. This is because with the friction that comes from the pads pressing against them, comes a lot of heat and pressure.

So it’s as they go about their job and get put through these high temperatures they do wear down. Your brakes get thorough workouts every time you drive so they are expected to wear out eventually.

Brake Shoe Replacement

Most modern cars use disc brakes on all four corners. However, older cars and even some modern ones, use drum brakes. Inside drum brakes are shoes. These shoes press against the spinning drum and slow you down via friction. They were most commonly used on the rear wheels as they don’t require as much braking force.