If your vehicle does not move when you step on the gas pedal My Auto Shop can get it sorted with a Engine Inspection. Simply leave as many details about the issue as you can and we will contact local MTA approved mechanics in Te Awamutu that are qualified to fix the underlying issue. We'll email you quotes for an inspection within 2 working days, and where possible provide an indication as to the likely underlying issue(s) and cost to fix. You can book directly on the My Auto Shop platform in minutes.

How a Engine Inspection works with My Auto Shop:

Our qualified mechanic will look to complete a thorough inspection of your vehicle's engine using the information or symptoms you have provided via the My Auto Shop platform. To complete this the mechanic will usually start by plugging into your OBDII port and completing a complete diagnostic scan. This will highlight any error or warning codes your vehicle has and will provide the mechanic with information they. need to fix your problem.

Depending on the symptoms the mechanic will take a good look at your vehicles:
- Drive & timing belts (cambelt, serpentine belts);
- Camshaft & crankshaft;
- Spark plugs; or
- Oil pan.

Before completing any repairs the mechanic will complete a quote and look for your approval.

When your vehicle does not move when you step on the gas pedal its often as a result of a:

• Malfunctioning electronic throttle control
• Emergency break is on or stuck
• Engine management issues
• Low fuel pressure
• Gross intake manifold leak

Popular services linked to a Engine Inspection:

Radiator Top Hose Replacement

In order for your hot coolant to make it back to your radiator, it has to flow through a thick rubber hose. This is the radiator top hose. Over time, due to the pressure of the cooling system, the high heats from the coolant, and general wear and tear, the hose breaks down and will need to be replaced.

Camshaft Position Sensor Replacement

Your engine computer needs to know when it’s time to send a spark through the spark plug, it does this with the information from the camshaft position sensor. The CPS tells the engine computer the exact right time to ignite the air/fuel mixture and makes sure your engine runs as flawlessly as possible.

Hydraulic Lifter Replacement

Hydraulic lifters are a complicated little part that are integral to a complicated system. They use oil to control the amount of lift that the camshaft gives to the valves. The lifters make sure that your engine runs smoothly and remove the need for valve adjustments.

Coolant Reservoir Replacement

The coolant reservoir holds excess coolant and in the event that the cooling system starts to run a little low it can draw more coolant. It draws coolant out of the system if it gets too hot and then feeds this back to the cooling system. This stops the system from running dry and also giving you a clear indication of how much coolant is in the system.