If your vehicle is leaning to one side My Auto Shop can get it sorted with a Suspension Inspection. Simply leave as many details about the issue as you can and we will contact local MTA approved mechanics in Gisborne that are qualified to fix the underlying issue. We'll email you quotes for an inspection within 2 working days, and where possible provide an indication as to the likely underlying issue(s) and cost to fix. You can book directly on the My Auto Shop platform in minutes.

How a Suspension Inspection works with My Auto Shop:

Our mechanic will raise your car and look underneath for any signs of damage or deterioration. They will then proceed to check for excessive tyre wear, damage to the wheel bearings, springs, shock absorbers or struts. After this they will check the CV joints, and inspect the suspension arms, bars and bushes for signs of damage.

They will then quote up any repairs or replacement parts if required.

When your vehicle is leaning to one side its often as a result of a:

• Stuck strut, spring, or shock absorber
• Bent suspension or twisted chassis
• Tyres are not consistent in size

Popular services linked to a Suspension Inspection:

Power Steering Fluid Replacement

Your power steering pump means you don’t need arms like a gorilla to turn your car at low speeds. The power steering pump needs something to pump around to do its job. This is where power steering fluid comes in.

Tie Rod End Replacement

When you turn your steering wheel, you like to think your car will go in that direction. The tie rod is a valuable component in making that happen. When you turn the wheel one tie rod pulls the wheel towards it and the other tie rod pushes the other wheel away from it. This is what turns your car. It is important that these are fitted correctly and doing their job to keep you safe on the road.

Power Steering Pump Replacement

Your power steering is your best friend when driving around town. The power steering pump is what generates the fluid pressure that assists your steering inputs. The pump is run off a belt from the drive pulley and due to the constant usage, they are known to suffer from faults.

CV Boot Replacement

CV boots work much the same as boots you wear on your feet; they're designed to keep moisture dirt and grit out of an area where it’s not wanted. The CV joint has a really important job and some important bearing and seals make this happen. The CV boot protects these components to ensure your car works as it should.