If your vehicle is stalling My Auto Shop can get it sorted with an Engine Inspection. Simply leave as many details about the issue as you can and we will contact local MTA approved mechanics in Southland that are qualified to fix the underlying issue. We'll email you quotes for an inspection within 2 working days, and where possible provide an indication as to the likely underlying issue(s) and cost to fix. You can book directly on the My Auto Shop platform in minutes.

How a Engine Inspection works with My Auto Shop:

Our qualified mechanic will look to complete a thorough inspection of your vehicle's engine using the information or symptoms you have provided via the My Auto Shop platform. To complete this the mechanic will usually start by plugging into your OBDII port and completing a complete diagnostic scan. This will highlight any error or warning codes your vehicle has and will provide the mechanic with information they. need to fix your problem.

Depending on the symptoms the mechanic will take a good look at your vehicles:
- Drive & timing belts (cambelt, serpentine belts);
- Camshaft & crankshaft;
- Spark plugs; or
- Oil pan.

Before completing any repairs the mechanic will complete a quote and look for your approval.

When your vehicle is stalling its often as a result of a:

• Blocked Fuel Filter
• Broken Fuel Pump
• Vacuum Leaks
• Sensors are broken and triggering a stall

Popular services linked to a Engine Inspection:

Radiator Top Hose Replacement

In order for your hot coolant to make it back to your radiator, it has to flow through a thick rubber hose. This is the radiator top hose. Over time, due to the pressure of the cooling system, the high heats from the coolant, and general wear and tear, the hose breaks down and will need to be replaced.

Radiator Bottom Hose Replacement

In order to send your cooled coolant from the radiator to the engine, it has to travel through the radiator bottom hose. This hose is prone to wearing out over time, this is due to the constant pressure and heat cycles. You don’t want coolant going on the ground instead of the engine, so get the bottom hose fixed as soon as possible.

Fuel Gauge Sender Replacement

As you drive around town, your car uses petrol. Over time this petrol starts to run out, rather than play guesswork your fuel gauge sender unit tells you how much you’ve got left. This lets you know via your fuel gauge, when it’s time to top your car off.

Hydraulic Lifter Replacement

Hydraulic lifters are a complicated little part that are integral to a complicated system. They use oil to control the amount of lift that the camshaft gives to the valves. The lifters make sure that your engine runs smoothly and remove the need for valve adjustments.