If your vehicle surges when the air conditioning is on My Auto Shop can get it sorted with an Engine Inspection. Simply leave as many details about the issue as you can and we will contact local MTA approved mechanics in Hastings that are qualified to fix the underlying issue. We'll email you quotes for an inspection within 2 working days, and where possible provide an indication as to the likely underlying issue(s) and cost to fix. You can book directly on the My Auto Shop platform in minutes.

How a Engine Inspection works with My Auto Shop:

Our qualified mechanic will look to complete a thorough inspection of your vehicle's engine using the information or symptoms you have provided via the My Auto Shop platform. To complete this the mechanic will usually start by plugging into your OBDII port and completing a complete diagnostic scan. This will highlight any error or warning codes your vehicle has and will provide the mechanic with information they. need to fix your problem.

Depending on the symptoms the mechanic will take a good look at your vehicles:
- Drive & timing belts (cambelt, serpentine belts);
- Camshaft & crankshaft;
- Spark plugs; or
- Oil pan.

Before completing any repairs the mechanic will complete a quote and look for your approval.

When your vehicle surges when the air conditioning is on its often as a result of a:

• Carbon Buildup
• Low Refrigerant in the AC System
• Failing AC Compressor
• Bad Belt Alignment or fitting
• Bad AC Cycling Switch
• Overfilled AC System

Popular services linked to a Engine Inspection:

Exhaust Manifold Gasket Replacement

You don't want your engine's exhaust pouring into your car. The exhaust manifold connects to your exhaust pipe, carrying gases towards the muffler until they exit via the tailpipe. It is the main gasket that seals and pressurises the entire exhaust system. Gaskets are used to seal gaps between two different surfaces. The surface where the exhaust manifold meets the engines parts must be sealed - this is what the Exhaust Manifold Gasket does.

Oil Filter Housing Replacement

Your oil filter is critical to your engine’s maintenance. It needs something to screw into and somewhere to get the oil from. This is where the oil filter housing comes into play. The oil filter housing has the simple existence of holding the oil filter and feed lines. Most cars will never need to worry about the housing, the oil filter is obviously the most serviced item of the assembly. However, if there’s a problem with the oil filter housing, it needs to be fixed.

Oxygen Sensor Replacement

Due to modern environmental concerns, car manufacturers have brought a raft of measures to help lower carbon footprint - namely emissions. This is where the oxygen sensor comes in. This is a sensor that is connected to your exhaust manifold which detects the level of oxygen in your exhaust gas. This helps ensure that the car is running with the exact air/fuel ratio it needs for peak performance – in both power and efficiency.

Accelerator Cable Replacement

A lot of cars used to trust a steel cable to transmit inputs to the accelerator to the engine. Modern cars use a drive-by-wire system. Over time the cable will need adjusting as it stretches. In some rare cases, if you’re a real fast and furious driver, it can snap and require replacing.