If your parking brake won't release My Auto Shop can get it sorted with a Brake Inspection. Simply leave as many details about the issue as you can and we will contact local MTA approved mechanics in Hawera that are qualified to fix the underlying issue. We'll email you quotes for an inspection within 2 working days, and where possible provide an indication as to the likely underlying issue(s) and cost to fix. You can book directly on the My Auto Shop platform in minutes.

How a Brake Inspection works with My Auto Shop:

A qualified mechanic will check over your entire braking system to understand whats causing the issue. This includes checking of the brake fluid for contamination, brake lines, and removing the wheels to measure the thickness of the brake pads, rotors or shoes (if applicable).

The following components are looked at during a Brake Inspection:
- Brake pads and shoes
- Hydraulic fluid
- Rotor and drum wear
- Calipers
- Wheel cylinders
- All brake hardware
- All hoses and lines
- Master cylinder
- Anti-lock system

They will then quote up any repairs or replacement parts if required.

When your parking brake won't release its often as a result of a:

• Corroded Parking Brake Cable
• Damaged Return Springs
• Rear Caliper Pivot Arm Seized
• Stuck Caliper

Popular services linked to a Brake Inspection:

Brake Shoe Replacement

Most modern cars use disc brakes on all four corners. However, older cars and even some modern ones, use drum brakes. Inside drum brakes are shoes. These shoes press against the spinning drum and slow you down via friction. They were most commonly used on the rear wheels as they don’t require as much braking force.

Brake Booster Replacement

Your brake booster is what makes it easier to press the pedal in and slow the car down. You’d be surprised how hard it is to physically brake your car without a booster. It makes driving a whole lot easier and it’s something that you won’t truly appreciate till it’s gone.

Front Brake Pad and Rotor Replacement

The front brakes of your vehicle are responsible for the majority of your stopping ability. The stopping ability is created via your front brake pads and rotors. As stopping is one of the most important parts of driving, these parts are some of the most important on the car.

Brake Drum Replacement

With the rise of disc braking in modern cars, drum brakes aren’t used as often anymore. However, some utes and modern cars still use drums for the rear wheel braking. A drum brake consists of a ‘drum’ looking iron bowl which sits behind the wheel and spins at the same speed. Inside this drum are two shoes which are pushed against the inside of the spinning drum. The resulting friction is what slows the car down.