If your brakes must be pumped to work correctly My Auto Shop can get it sorted with a Brake Inspection. Simply leave as many details about the issue as you can and we will contact local MTA approved mechanics in Bay of Plenty that are qualified to fix the underlying issue. We'll email you quotes for an inspection within 2 working days, and where possible provide an indication as to the likely underlying issue(s) and cost to fix. You can book directly on the My Auto Shop platform in minutes.

How a Brake Inspection works with My Auto Shop:

A qualified mechanic will check over your entire braking system to understand whats causing the issue. This includes checking of the brake fluid for contamination, brake lines, and removing the wheels to measure the thickness of the brake pads, rotors or shoes (if applicable).

The following components are looked at during a Brake Inspection:
- Brake pads and shoes
- Hydraulic fluid
- Rotor and drum wear
- Calipers
- Wheel cylinders
- All brake hardware
- All hoses and lines
- Master cylinder
- Anti-lock system

They will then quote up any repairs or replacement parts if required.

When your brakes must be pumped to work correctly its often as a result of a:

• Failing Master Cylinder
• Air in the brakes hydraulic lines
• Low Brake Fluid
• Moisture in the Fluid
• Damaged or Missing Bleeder Valve

Popular services linked to a Brake Inspection:

Brake Shoe Replacement

Most modern cars use disc brakes on all four corners. However, older cars and even some modern ones, use drum brakes. Inside drum brakes are shoes. These shoes press against the spinning drum and slow you down via friction. They were most commonly used on the rear wheels as they don’t require as much braking force.

Front Brake Rotor Replacement

Your brake rotors are what your brake pads are pressed against to slow the car down. They are the round, shiny, steel discs that you can see behind your front wheels. These are usually made out of steel or other strong steel materials.

Front Brake Pad Replacement

Your front brake pads are the things that are pressed against the front brake rotors when you press the brake pedal. The friction between the pad and rotor is what creates the stopping ability. These need to be in top working condition. Not just to keep you safe and prevent accidents, they also need to be in good working order to pass a warranty of fitness.

Brake Fluid Flush

A spongy pedal feel, increased stopping distance or a WoF failure are all things that can come about from needing a brake fluid flush. Rather than get into an accident, get your system flushed to get some peace of mind.