If your vehicle is not getting enough power My Auto Shop can get it sorted with a Engine Inspection. Simply leave as many details about the issue as you can and we will contact local MTA approved mechanics that are qualified to fix the underlying issue. We'll email you quotes for an inspection within 2 working days, and where possible provide an indication as to the likely underlying issue(s) and cost to fix. You can book directly on the My Auto Shop platform in minutes.

How a Engine Inspection works with My Auto Shop:

Our qualified mechanic will look to complete a thorough inspection of your vehicle's engine using the information or symptoms you have provided via the My Auto Shop platform. To complete this the mechanic will usually start by plugging into your OBDII port and completing a complete diagnostic scan. This will highlight any error or warning codes your vehicle has and will provide the mechanic with information they. need to fix your problem.

Depending on the symptoms the mechanic will take a good look at your vehicles:
- Drive & timing belts (cambelt, serpentine belts);
- Camshaft & crankshaft;
- Spark plugs; or
- Oil pan.

Before completing any repairs the mechanic will complete a quote and look for your approval.

When your vehicle is not getting enough power its often as a result of a:

• Defective Fuel Pump or Filter
• Clogged or Bad Fuel Injector
• Leaking Fuel Line
• Vacuum Leak
• Dirty Airflow Sensor

Popular services linked to a Engine Inspection:

Fuel Pressure Regulator Replacement

To pump fuel from your gas tank to your engine, your car has a fuel pump. In order to make sure that your fuel pump sends the right pressure fuel to the engine, your car has a fuel pressure regulator. When it plays up, your car can get too much or too little fuel and this can cause issues with your driving.

Fuel Injector Replacement

In order to get the right amount of fuel into your engine, your engine computer uses fuel injectors. These injectors are used to spray the exact right amount of fuel into the combustion chamber. They give the engine way more ability to be economical and efficient than old carburettors did.

PCV Valve Replacement

Your PCV valve sounds like a very complicated thing. In reality it just lets some pressure out of the engine. This pressure is built up due to the engine's rotations and heat, the PCV valve is responsible for venting this pressure into the intake.

Radiator Bottom Hose Replacement

In order to send your cooled coolant from the radiator to the engine, it has to travel through the radiator bottom hose. This hose is prone to wearing out over time, this is due to the constant pressure and heat cycles. You don’t want coolant going on the ground instead of the engine, so get the bottom hose fixed as soon as possible.