If your Engine Temperature Warning Light is on My Auto Shop can get it sorted with a Engine Inspection. Simply leave as many details about the issue as you can and we will contact local MTA approved mechanics in Bay of Plenty that are qualified to fix the underlying issue. We'll email you quotes for an inspection within 2 working days, and where possible provide an indication as to the likely underlying issue(s) and cost to fix. You can book directly on the My Auto Shop platform in minutes.

How a Engine Inspection works with My Auto Shop:

Our qualified mechanic will look to complete a thorough inspection of your vehicle's engine using the information or symptoms you have provided via the My Auto Shop platform. To complete this the mechanic will usually start by plugging into your OBDII port and completing a complete diagnostic scan. This will highlight any error or warning codes your vehicle has and will provide the mechanic with information they. need to fix your problem.

Depending on the symptoms the mechanic will take a good look at your vehicles:
- Drive & timing belts (cambelt, serpentine belts);
- Camshaft & crankshaft;
- Spark plugs; or
- Oil pan.

Before completing any repairs the mechanic will complete a quote and look for your approval.

When your Engine Temperature Warning Light is on its often as a result of a:

• Low, leaking or old coolant
• A defective thermostat that is stuck closed
• A bad water pump
• Radiator is clogged with debris
• Radiator hoses have collapsed
• Radiator cap is worn out or defective
• Blocked coolant passages inside the engine
• Cooling fan has failed
• Low oil level
• Blown head gasket
• Bad temperature sensor, producing a false warning

Popular services linked to a Engine Inspection:

Exhaust Manifold Gasket Replacement

You don't want your engine's exhaust pouring into your car. The exhaust manifold connects to your exhaust pipe, carrying gases towards the muffler until they exit via the tailpipe. It is the main gasket that seals and pressurises the entire exhaust system. Gaskets are used to seal gaps between two different surfaces. The surface where the exhaust manifold meets the engines parts must be sealed - this is what the Exhaust Manifold Gasket does.

Cambelt Replacement

Also known as a “timing belt” the cambelt ensures the engine values open and close at the correct time by ensuring the camshaft and crankshaft in the engine remain aligned. The belt, made from reinforced rubber, is tensioned between a series of pulleys and tensioners, making sure that the belt does not slip and that it remains aligned, for optimum engine performance. Some vehicles have a timing chain that replaces the cambelt. Timing chains are more reliable and therefore need replacing less often, but are more complicated to replace if they become damaged.

PCV Valve Replacement

Your PCV valve sounds like a very complicated thing. In reality it just lets some pressure out of the engine. This pressure is built up due to the engine's rotations and heat, the PCV valve is responsible for venting this pressure into the intake.

Mass Airflow Sensor Replacement

The mass airflow sensor checks the amount of airflow that’s coming into the engine. It then sends this information to the ECU which will use this info to adjust the fuel mixture that is injected via the fuel injectors.