If your Oil Pressure Warning Light is on My Auto Shop can get it sorted with a Engine Inspection. Simply leave as many details about the issue as you can and we will contact local MTA approved mechanics that are qualified to fix the underlying issue. We'll email you quotes for an inspection within 2 working days, and where possible provide an indication as to the likely underlying issue(s) and cost to fix. You can book directly on the My Auto Shop platform in minutes.

How a Engine Inspection works with My Auto Shop:

Our qualified mechanic will look to complete a thorough inspection of your vehicle's engine using the information or symptoms you have provided via the My Auto Shop platform. To complete this the mechanic will usually start by plugging into your OBDII port and completing a complete diagnostic scan. This will highlight any error or warning codes your vehicle has and will provide the mechanic with information they. need to fix your problem.

Depending on the symptoms the mechanic will take a good look at your vehicles:
- Drive & timing belts (cambelt, serpentine belts);
- Camshaft & crankshaft;
- Spark plugs; or
- Oil pan.

Before completing any repairs the mechanic will complete a quote and look for your approval.

When your Oil Pressure Warning Light is on its often as a result of a:

• Low oil level
• Your oil pump is bad
• Your oil filter is blocked
• Your sensor, wiring or warning light is bad
• Your oil system is clogged with sludge
• Your engine is worn

Popular services linked to a Engine Inspection:

Idler Pulley Replacement

The idler pulley is a component that doesn’t power anything but it makes sure that things can be powered correctly. Your drive belts power things like power steering, alternators, water pumps etc. The idler pulley makes sure that all of these can be powered as they should and that all the required belts stay where they should.

Mass Airflow Sensor Replacement

The mass airflow sensor checks the amount of airflow that’s coming into the engine. It then sends this information to the ECU which will use this info to adjust the fuel mixture that is injected via the fuel injectors.

Coolant Reservoir Replacement

The coolant reservoir holds excess coolant and in the event that the cooling system starts to run a little low it can draw more coolant. It draws coolant out of the system if it gets too hot and then feeds this back to the cooling system. This stops the system from running dry and also giving you a clear indication of how much coolant is in the system.

Oil Cooler Replacement

Your engine oil has one of the most important jobs in your car - it keeps your motor lubricated and running as it should. Much everything else mechanical in your car, it has a perfect operating temperature. One of the little thought about things with oil, is that it not only lubricates everything, but also cools key internal components.