If your parking brake is stuck My Auto Shop can get it sorted with a Brake Inspection. Simply leave as many details about the issue as you can and we will contact local MTA approved mechanics that are qualified to fix the underlying issue. We'll email you quotes for an inspection within 2 working days, and where possible provide an indication as to the likely underlying issue(s) and cost to fix. You can book directly on the My Auto Shop platform in minutes.

How a Brake Inspection works with My Auto Shop:

A qualified mechanic will check over your entire braking system to understand whats causing the issue. This includes checking of the brake fluid for contamination, brake lines, and removing the wheels to measure the thickness of the brake pads, rotors or shoes (if applicable).

The following components are looked at during a Brake Inspection:
- Brake pads and shoes
- Hydraulic fluid
- Rotor and drum wear
- Calipers
- Wheel cylinders
- All brake hardware
- All hoses and lines
- Master cylinder
- Anti-lock system

They will then quote up any repairs or replacement parts if required.

When your parking brake is stuck its often as a result of a:

• Damaged/Stuck Adjuster Screw
• Rust and Corrosion
• Engaged Too Hard
• Leaving It Engaged for Too Long

Popular services linked to a Brake Inspection:

Brake Shoe Replacement

Most modern cars use disc brakes on all four corners. However, older cars and even some modern ones, use drum brakes. Inside drum brakes are shoes. These shoes press against the spinning drum and slow you down via friction. They were most commonly used on the rear wheels as they don’t require as much braking force.

Brake Light Switch Replacement

It’s pretty common for a brake light bulb to blow out every now and again. If all the brake lights stop working, i.e nothing lights up when you press the brake pedal, then it’s most likely a problem with the wiring, relay or switches. If all your brake lights don’t come on then the switch may be faulty.

Brake Wheel Cylinder Replacement

A brake wheel cylinder is part of the braking system for vehicles with drum brakes. They are often replaced with the car's brake shoes and always in pairs i.e. both sides. The brake wheel cylinder is activated by hydraulic brake fluid which forces the brake shoes against the drum when the brakes are applied.

It is important that the brakes are adjusted and that the brake fluid system is bled to remove any air to ensure that the brake performance is maintained following a brake wheel cylinder replacement.

Front Brake Pad and Rotor Replacement

The front brakes of your vehicle are responsible for the majority of your stopping ability. The stopping ability is created via your front brake pads and rotors. As stopping is one of the most important parts of driving, these parts are some of the most important on the car.