Save over 20% when you get your Ssangyong's CV Boot Replacement with My Auto Shop

brought to you.

Or compare prices from over 300 MTA approved
mechanics throughout New Zealand.

NZ's #1 automotive repair booking site.

My Auto Shop: Trademe My Auto Shop: mta My Auto Shop: trustpilot Afterpay
Afterpay My Auto Shop: mta

Ssangyong CV Boot Replacement

CV boots work much the same as boots you wear on your feet; they're designed to keep moisture dirt and grit out of an area where it’s not wanted. The CV joint has a really important job and some important bearing and seals make this happen. The CV boot protects these components to ensure your car works as it should. 

What is a CV boot?

A CV boot is made out of a rubber-like composite material and is fitted over the CV joint behind the wheels. This means that as the wheels throw up things like stones, dirt, moisture or other contaminants, they don’t get inside the CV joint and wreck it. It does however keep one thing in and around the CV joint and that's the grease that keeps this key part lubricated.

They’re made out of a softer composite material because they need to withstand; turns, bounces, corners and heat cycles. They do wear down over time because of this, but it’s far easier and cheaper to replace a boot than it is to replace a CV joint. 

05+ Tacoma, 10+ 4Runner and 07-14 FJ Cruiser High Angle Outer CV Boot Kit

Why do you need a CV boot? 

A CV boot protects your CV joint from harmful contaminants that can hinder its ability to function properly. As your CV joint is critical to you being able to drive your car, it’s something that’s important to maintain. 

How to tell if you need a new CV boot?

The easiest way is to check the boot yourself for cracks, splits, or grease leaking out. You can do this by turning the wheels hard in one direction and checking the boot on one side and then doing the same for the other. Another way is if your steering is heavier than usual or you hear the tell tale signs of a CV joint failure; whining, ratcheting when turning or squealing under acceleration. All signs that your CV boots need to be replaced. 

How is a Ssangyong's CV boot replaced? 

The mechanic will loosen the wheels before hoisting the car in the air. Once suspended, they will remove the wheels and loosen the top struts as well as removing the front sway bar if required. They will then remove the old CV boot and assess the joint. Most of the time the joint will need to be replaced also. They will then thoroughly clean the CV joint and surrounding parts before re-greasing and fitting the new CV boot. They will then reconnect all struts, sway bars and wheels and lower the car down. They will then test drive it and give it one more check.

How much does a CV boot replacement cost?

If it’s just the CV boot then usually it’s not too pricey. Expect prices to start around $100 but if the joint needs replacing or more than one boot need replacing, prices can easily climb to over $650+.

How often do I need a CV boot replaced?

It’s a serviced item, but a long life part as well. Usually these won’t fail under 120,000km. 

Is a broken CV boot unsafe?

It can lead to damage to your CV joint which can lead to a serious accident. As this is something you’ll want to avoid, we suggest you get your CV boot replaced when it’s needed.

You can find a mechanic near me with My Auto Shop.

Why book with My Auto Shop?

Landing Page

Trusted repairers

All workshops are MTA approved, so you know your car's in safe hands. All work is covered by our 6-month / 10,000km warranty.

Landing Page

Never overpay

We provide transparent, upfront pricing and quotes for hundreds of services and repairs. Book with confidence.

Landing Page

We make it easy

Get prices and book online 24/7. We come to you. Easy as.

Check Prices

New Zealand's best mechanics at your fingertips

With hundreds of MTA approved garages nationwide, we have one just for you

View all garages