If your engine idle speed is high My Auto Shop can get it sorted with a Engine Inspection. Simply leave as many details about the issue as you can and we will contact local MTA approved mechanics that are qualified to fix the underlying issue. We'll email you quotes for an inspection within 2 working days, and where possible provide an indication as to the likely underlying issue(s) and cost to fix. You can book directly on the My Auto Shop platform in minutes.

How a Engine Inspection works with My Auto Shop:

Our qualified mechanic will look to complete a thorough inspection of your vehicle's engine using the information or symptoms you have provided via the My Auto Shop platform. To complete this the mechanic will usually start by plugging into your OBDII port and completing a complete diagnostic scan. This will highlight any error or warning codes your vehicle has and will provide the mechanic with information they. need to fix your problem.

Depending on the symptoms the mechanic will take a good look at your vehicles:
- Drive & timing belts (cambelt, serpentine belts);
- Camshaft & crankshaft;
- Spark plugs; or
- Oil pan.

Before completing any repairs the mechanic will complete a quote and look for your approval.

When your engine idle speed is high its often as a result of a:

• Faulty Fuse
• Faulty Idle Air Control Valve (ICV)
• Vacuum Leak
• Malfunctioning Throttle
• Computer Malfunction

Popular services linked to a Engine Inspection:

Air Intake Replacement

In order to get air into your engine it first passes through an air filter which is connected to the intake plenum. The air intake is the system from which air gets from outside to inside the engine. It also houses important sensors like mass airflow sensors and intake temperature sensors.

Radiator replacement

If your car is overheating, running the fans aggressively, the radiator is leaking, or the temperature gauge keeps climbing in stop or start traffic then it might be time for a radiator replacement. As keeping your engine at the right temperature is the radiator’s key job, it’s one that you want it to do perfectly.

Coolant Level Sensor Replacement

If you aren’t super mechanically minded, you probably don’t check your coolant that often. Lucky for you, your coolant level sensor does that for you. If it fails, you won’t be reminded to top off your coolant. If you forget to do that, you can overheat your engine and that can lead to a bunch of issues down the track.

Radiator Bottom Hose Replacement

In order to send your cooled coolant from the radiator to the engine, it has to travel through the radiator bottom hose. This hose is prone to wearing out over time, this is due to the constant pressure and heat cycles. You don’t want coolant going on the ground instead of the engine, so get the bottom hose fixed as soon as possible.