If your engine idle speed is high My Auto Shop can get it sorted with a Engine Inspection. Simply leave as many details about the issue as you can and we will contact local MTA approved mechanics in West Coast that are qualified to fix the underlying issue. We'll email you quotes for an inspection within 2 working days, and where possible provide an indication as to the likely underlying issue(s) and cost to fix. You can book directly on the My Auto Shop platform in minutes.

How a Engine Inspection works with My Auto Shop:

Our qualified mechanic will look to complete a thorough inspection of your vehicle's engine using the information or symptoms you have provided via the My Auto Shop platform. To complete this the mechanic will usually start by plugging into your OBDII port and completing a complete diagnostic scan. This will highlight any error or warning codes your vehicle has and will provide the mechanic with information they. need to fix your problem.

Depending on the symptoms the mechanic will take a good look at your vehicles:
- Drive & timing belts (cambelt, serpentine belts);
- Camshaft & crankshaft;
- Spark plugs; or
- Oil pan.

Before completing any repairs the mechanic will complete a quote and look for your approval.

When your engine idle speed is high its often as a result of a:

• Faulty Fuse
• Faulty Idle Air Control Valve (ICV)
• Vacuum Leak
• Malfunctioning Throttle
• Computer Malfunction

Popular services linked to a Engine Inspection:

Radiator Top Hose Replacement

In order for your hot coolant to make it back to your radiator, it has to flow through a thick rubber hose. This is the radiator top hose. Over time, due to the pressure of the cooling system, the high heats from the coolant, and general wear and tear, the hose breaks down and will need to be replaced.

Fuel Injector Replacement

In order to get the right amount of fuel into your engine, your engine computer uses fuel injectors. These injectors are used to spray the exact right amount of fuel into the combustion chamber. They give the engine way more ability to be economical and efficient than old carburettors did.

Coolant Level Sensor Replacement

If you aren’t super mechanically minded, you probably don’t check your coolant that often. Lucky for you, your coolant level sensor does that for you. If it fails, you won’t be reminded to top off your coolant. If you forget to do that, you can overheat your engine and that can lead to a bunch of issues down the track.

Harmonic Balancer Replacement

A harmonic balancer is not a musical instrument, it’s a very important engine component. It’s connected to the crankshaft, and is almost always found at the front of the engine. Its primary job is to reduce vibrations in your engine and ensure smooth running. However, as it runs off of the crankshaft it’s usually used as a pulley to run the belts that power vital components such as: power steering, radiator fans, air conditioning and alternators.